I-Deep Hole Turning and Boring Machine TCS2150
Incazelo Yomsebenzi
Umshini ufakwe nge-headstock yomsebenzi kanye nekhanda lokuhamba nge-drilling ejikelezayo / induku eyisicefe, kokubili i-workpiece kanye nethuluzi lingajikeleza, futhi ithuluzi lokusika lingabuye lilungiswe, ukudla kuphela.
Ngaphezu kwalokho, lo mshini uphinde ufakwe i-toolpost efana naleyo ye-lathe, ukuze umshini wengeze umsebenzi wokuguqula umbuthano wangaphandle ngesisekelo sokumba imbobo ejulile kanye nomshini oyisicefe.Umshini uchungechunge lwemikhiqizo, futhi ungahlinzeka ngemikhiqizo ehlukahlukene eguquliwe ngokuya ngezidingo zamakhasimende.
Umshini uqukethe umbhede, i-headstock yomsebenzi, ilambu le-chuck, ukuphumula okuvulekile okungaguquki, ukuphumula okungaguquki, ikhanda lokucindezela uwoyela, i-vibration damper engaguquki njengenduku eyisicefe, ikhanda lokuhamba elinenduku ezungezayo yokubhola / eyisicefe, isistimu yokupholisa, isistimu kagesi, i-hydraulic system, i-chip. ukususa idivayisi, isistimu yokugcoba, ithuluzi lokuphendula njll.
i-jaw chuck emine ifakwe ku-headstock yomsebenzi ngenkathi kubhola, futhi ngenkathi kuyisicefe, kusetshenziswa amapuleti e-taper amabili, enye ifakwe ekugcineni kwe-spindle esihlokweni somsebenzi, enye ifakwe ekhanda lokucindezela uwoyela, amapuleti e-taper. zilungele kakhulu ukuzimela, esimweni esijwayelekile, izinga lamapuleti e-taper liyi-15 °, imfuneko enemininingwane yamapuleti e-taper inqunywa usayizi we-workpiece.Ikhasimende lingaphinda likhethe enye indlela yokubopha.Kukhona ipuleti le-taper phambi kwekhanda lokucindezela uwoyela (ithuluzi lokuhambisa uwoyela), futhi kukhona isihlahla somhlahlandlela ngaphakathi kwamapuleti e-taper, asetshenziselwa ukubhoboza umhlahlandlela / ikhanda elibhokayo, lesi sihlahla somhlahlandlela kufanele sishintshwe lapho ithuluzi lokusika. izoguqulwa.
Ipharamitha yobuchwepheshe
| Amandla Okusebenza | Ibanga lokubhoboza i-Dia. | Φ40-Φ120mm |
| Ubukhulu.isicefe Dia. | Φ500mm | |
| Ubukhulu.ukujula okuyisicefe | 1-16m | |
| Ubukhulu.ephendukela ngaphandle Dia. | Φ600mm | |
| I-Workpiece iboshwe i-Dia.ububanzi | Φ100-Φ660mm | |
| I-spindle | Ubude obumaphakathi ukusuka enkabeni yokuphotha ukuya embhedeni | 630 mm |
| USpindle wazala uDia. | Φ120mm | |
| I-taper ye-spindle bore | Φ140mm, 1:20 | |
| Ibanga lejubane lokuphotha | 16-270rpm, 12 izinhlobo | |
| Ikhanda lokuhamba elinebha yokubhola ejikelezayo | USpindle wazala uDia.yekhanda lokuhamba elinebha yokubhola ejikelezayo | Φ100mm |
| I-taper ye-spindle bore (ikhanda lokuhamba elinebha yokubhola ejikelezayo) | Φ120mm, 1:20 | |
| Ibanga lejubane lokuphotha (ikhanda lokuhamba elinebha yokubhola ejikelezayo) | 82-490rpm, 6 izinhlobo | |
| Okuphakelayo | Ibanga lesivinini sokuphakelayo (elingapheli) | 0.5-450mm/min |
| Isivinini sokuhamba esisheshayo senqola | 2m/min | |
| Izimoto | Amandla emoto amakhulu | 45KW |
| Amandla emoto wekhanda lokuhamba elinebha yokubhola ejikelezayo | 30KW | |
| Amandla emoto wephampu ye-hydraulic | 1.5KW, n=1440rpm | |
| Ukuhamba okusheshayo amandla emoto yenqola | 5.5KW | |
| Okuphakelayo amandla emoto | 7.5KW (injini ye-servo) | |
| Amandla emoto wephampu yokupholisa | 5.5KWx3 + 7.5KWx1 (amaqembu ama-4) | |
| I-Motor ye-axis ye-Z | 4KW | |
| I-motor ye-X axis | 23N.m (engenasinyathelo) | |
| Abanye | Ingcindezi elinganiselwe yesistimu yokupholisa | 2.5MPa |
| Ukugeleza kwesistimu yokupholisa | 100,200,300,600L/min |